Fibre Glass Processors
Back to Engineering InsightsFGP Technical Bulletin
1 min read·Custom ManufacturingChemical ResistanceMaterial Selection

Custom FRP Fabrication: Building for Energy, Water & Chemical Industries

Authored by FGP Technical Engineering Desk·ISO 9001:2008 Certified Facility · Rajkot, Gujarat

23+ years

60,000 sq ft plant

27+ products

ISO 9001:2008 certified

The Problem

Most industrial storage and process problems aren't solved by a bigger tank — they're solved by the right tank. Chemical compatibility, operating temperature, pressure, and installation footprint each push the design in a different direction, and a standard catalogue part is usually a compromise on at least one of them.

How We Engineer It

Custom FRP fabrication starts with the application, not the vessel. A hydrochloric acid storage tank and a cooling-tower component are both 'FRP,' but they call for different resin systems, different wall thicknesses, and different internal linings. Getting the resin system wrong doesn't fail gracefully — it fails as a leak or a structural crack years into service.

Why It Matters

That's why capacity, material, and wall thickness are treated as a design decision, not a menu selection: a 10,000 L HCl tank and a 10,000 L hot-water tank share almost nothing in construction once you look past the number on the nameplate.

The Result

For energy, water, and chemical-processing customers specifically, the recurring constraint is corrosive or high-temperature exposure combined with a need for a service life measured in decades, not years — which is the entire case for FRP over mild steel in the first place.

Engineering discipline

Engineering decisions we evaluate on every industrial build

No two chemical or structural specifications are identical, even at the same nominal capacity. Every FGP custom equipment project systematically resolves:

  • Capacity & working volume margins
  • Resin chemistry (Isophthalic vs Vinyl Ester vs Dual Laminate)
  • Laminate thickness & structural hoop stress calculation
  • Specific chemical concentration & operating temperature limits
  • Design standard compliance (BS 4994, ASTM D3299, ASTM D4097)
  • Nozzle orientation, manway positioning & installation constraints
  • Design life expectancy & preventive inspection protocol

Engineering consultation

Apply this engineering standard to your project

Share your project parameters with our Rajkot engineering desk — capacity, chemical exposure, operating temperature, and site layout — and we will calculate laminate specifications and provide a factory quotation.

Get in touch

Ready to engineer your composite equipment?
Consult directly with our plant engineers.

Over 23 years of proven composite engineering in Rajkot, Gujarat. We review CAD drawings, chemical media, and operating constraints.