Fibre Glass Processors
10,000-litre FRP pressure vessel (Ø1800 × 4520 mm, 6 bar) with flanged top nozzles and saddle supports

Tanks & Vessels

FRP Pressure Tank

Engineered for safe storage and processing of fluids under pressure, with an optional anti-corrosive internal lining for acid/alkali service.

Reference design

10 KL FRP Pressure Vessel: rated data

Published ratings for our 10 KL horizontal vessel, from its installation manual. Other capacities are designed per order, so their pressure and temperature ratings are confirmed on the quotation, not assumed from this table.

10 KL reference vessel · Hot-water service (hydraulic pressure only, not pneumatic).

Capacity
10,000L
Diameter
1,800mm
Length
4,520mm
Maximum operating pressure
6bar
Hydrostatic test pressure
8bar
Working temperature
80°C
Shell material
FRP
Dish-end material
FRP
Design code
ASME / BS
Two 10 KL horizontal FRP pressure vessels on steel saddles in the FGP production hall10 KL vessels in the FGP hall

Handling

  • Always lift the tank with two belts (slings).
  • Never roll the tank during handling.

Operating limits

  • Designed for hydraulic pressure only. Do not pressurise with air or gas.
  • Tanks are tested at 8 bar, but the warranty is void if operating pressure exceeds the 6 bar design pressure.

Installation, in short

  1. 1Inspect the tank for any damage that may have occurred in transit.
  2. 2Set the tank in place and connect it to the piping system, including isolation valve(s) and a drain.
  3. 3Purge air from the system before putting the tank into operation. System water is held behind the dish end on all models.
  4. 4When filling with water, open the valves to the tank so any residual air is displaced by water.
  5. 5Check all nuts, bolts and BSPT connections before applying pressure.

Technical specifications

Engineering specifications & operating envelope

Typical range across our FRP manufacturing line — exact dimensions, nozzle orientations, and wall thicknesses are confirmed per order.

Capacity & sizing ladder — Capacity range

Material
FRP (isophthalic / vinyl ester resin), or PP, PPH, UPVC, CPVC, PVDF, ECTFE
Wall thickness
25 – 50 mm, depending on design pressure & volume
Shape options
Vertical or horizontal cylindrical
Standard compliance
ASTM, BS, DIN, or as per client requirement
Service life
15 – 20 years, depending on application & maintenance

Engineered to comply with

ISO 9001:2008ASTMBSDINIS 14333EN 124ASTM D2583

Built in Rajkot

Recent builds from this product line, photographed at our Kuwadwa, Rajkot plant. Select a photo to view it larger.

In the field

Dispatch & installation

Loading, transport and erection photos from recent orders.

Why FRP over steel

Built to outperform steel in corrosive service.

  • Corrosion loss

    0.00 mm/year

    Mild steel loses 1.2–3.5 mm/year in chemical environments; composite resin is completely non-reactive.

  • Weight to strength

    75% lighter

    Dramatically reduces crane rental, hoisting complexity, and civil structural foundation loads.

  • Thermal & dielectric

    0.25 W/m·K

    Naturally insulating and non-conductive, eliminating galvanic corrosion and recurring paint cycles.

Direct factory quotation

Request a technical proposal for FRP Pressure Tank

Send your capacity requirements, chemical exposure details, and design constraints. Our Rajkot engineering desk evaluates your parameters and replies within 4 business hours.

  • Direct Factory Pricing
  • 100% FAT Inspected
  • 4-Hour SLA

Trusted across chemical, energy, water and export sectors — see our global reach

  • Fluor
  • Cairn
  • Essar
  • Gujarat Fluorochemicals (GFL)
  • Inox Fabrications
  • Reliance Industries
  • Tata Chemicals
  • WABAG
  • Veolia
  • Shapoorji Pallonji
  • Tüpraş
  • Panoli Intermediates
ISO 9001:2008ASTM D3299BS 4994EN 13121ASME RTP-1

Get in touch

Need custom dimensions or nozzle configurations?
Let's engineer to your exact envelope.

We fabricate to order in Rajkot, Gujarat. Upload your CAD drawings or discuss your application directly with our engineers.